THE COMPLETE PC

THE COMPLETE FAX/9600

Card Type         Modem/fax
Chipset           Rockwell
I/O Options       Scanner port, speaker out
Maximum Data Rate 2400bps (with modem daughterboard)
Maximum Fax Rate  9600bps
Data Modulation   Unidentified
Fax Modulation    Unidentified
Fax Class         Unidentified
Data Bus          8-bit ISA

[Image]

                                CONNECTIONS

           Function             Label           Function           Label

  Header for modem               CN1      Telephone line out        J2
  daughterboard

  Header for modem               CN2      Speaker out               J3
  daughterboard

  Telephone line in               J1      Scanner port              J4

                        USER CONFIGURABLE SETTINGS

                  Setting                      Label         Position

  Modem daughterboard not installed              P1         Pins 1 & 2
                                                              closed

  Modem daughterboard installed                  P1         Pins 2 & 3
                                                              closed

  Modem address is 3F8h (COM1:)                SW1/4           Off

  Modem address is 2F8h (COM2:)                SW1/4            On

        BASE I/O ADDRESS SELECTION

  Setting    SW1/1      SW1/2      SW1/3

   220h        On         On        On

   260h        On         On        Off

   2A0h        On        Off        On

   2E0h        On        Off        Off

   320h       Off         On        On

   360h       Off         On        Off

   3A0h       Off        Off        On

   3E0h       Off        Off        Off

             MODEM/SCANNER INTERRUPT SELECTION

  Setting      SW1/5       SW1/6      SW1/7       SW1/8

     2          On          Off        Off         Off

     3          Off         On         Off         Off

     4          Off         Off         On         Off

     5          Off         Off        Off          On

  Disabled      Off         Off        Off         Off

         SUPPORTED STANDARD COMMANDS

            The command set is unidentified.